Description
DT Spare Parts 1.21387 Xenon Ballast – Direct Fit Replacement
1.21387 Xenon Ballast Replacement is a Genuine DT Spare Parts xenon ballast. Replaces use number 5DV 007 810-171. £988.99. EU warehouse. Ships today.
When Your Xenon Headlight Goes Dark
You hit the switch. One side lights up. The other stays black. Not the bulb. You already swapped it. Not the fuse. Not the relay. The ballast is dead.
Understanding the DT Spare Parts 1.21387 Xenon
Xenon bulbs need a crazy amount of voltage to start. Around 25,000 volts. The ballast makes that happen. Then it regulates the current so the bulb doesn’t burn out in five seconds. No ballast. No light. Simple as that. The DT Spare Parts 1.21387 xenon ballast takes your truck’s 12V or 24V supply and does the high-voltage conversion. When the original fails from heat, moisture, or age, this unit steps in. For technical specs, DT Spare Parts lighting catalogue has the full engineering details.
Look at your old ballast. Find the use number. If it says 5DV 007 810-171, you have found your match. That number is the key. Not the truck brand. Not the model year. The use number tells the story. The 1.21387 DT Spare Parts ballast is a direct swap for units carrying that code. connector. Same mounting. output. Check the DT Spare Parts online catalogue for additional cross-reference data.
Heat. Moisture. Vibration. Three things trucks have plenty of. The original ballast sits inside the headlight housing or behind the bumper. Water finds its way in. Electronics corrode. The unit stops firing. Sometimes failure is sudden. One day it works. Next day, nothing. Other times it struggles first.
Takes longer to fire the bulb each time. Then one morning, no light at all. The DT Spare Parts xenon ballast 1.21387 uses proper sealing and potting compound. Built for commercial duty, not passenger cars. That means better insulation, higher-grade components, and longer service life. Many cheap ballasts fail within a year of truck use. This one keeps going.
Technical Specifications for 1.21387 Xenon Ballast Replacement
| What | Detail |
|---|---|
| Part number | 1.21387 |
| Brand | DT Spare Parts |
| Light type | Xenon |
| Lamps supported | 1 |
| Weight | 486g |
| Use number | 5DV 007 810-171 |
| EAN | 4047755934415 |
| Condition | New |
| Price | £988.99 |
How to Install the DT Spare Parts 1.21387 Xenon Ballast
Takes about twenty minutes. Pull the battery negative first. Xenon systems hold high voltage even when off. Let it sit five minutes before touching anything. Find the old ballast. Unplug it. Unbolt it from its bracket. Mount the new DT Spare Parts 1.21387 xenon ballast in the same position. Plug in the connectors. Make sure they click into place. Reconnect the battery. Test the light. The xenon should fire within three seconds. Steady beam. No flicker. No delay. If the light does not fire, check the connector orientation. Some plugs only work one way.
Common Questions About the Xenon Ballast
How do I confirm my old ballast matches this one? Find the use number on your existing unit. If it reads 5DV 007 810-171, you are good to go.
Will this DT Spare Parts 1.21387 xenon ballast work on 24V trucks? Yes. The unit handles both 12V and 24V systems automatically. No switches to set.
Why is this DT Spare Parts unit better than cheaper options? Cheaper ballasts use thinner cases, weaker sealing, and lower grade electronics. They fail. Then you buy another one. This one lasts. The price difference pays for itself the first time you avoid a roadside breakdown.
Can a workshop fit this for me? Any auto electrician can do it. Or DIY if you are comfortable with basic connectors. Just remember to disconnect the battery first.
What about returns? 30 days from US. Unused unit in original packaging.
Why Get It From US
EU warehouse. Ships today if you order before 2 PM CET. Genuine DT Spare Parts. No minimum order. One ballast or ten, same speed. We ship across the EU with tracking on every order.
Related Parts You Might Need
